Custom Plastic Injection Molding Service
— From Prototype to Production
A custom injection molding service goes a step further—designing and building molds specifically for your part, rather than offering off-the-shelf components. Get a Free Quote & DFM Analysis
- ISO 9001:2015 & IATF 16949 Certified
- 20+ Years of Manufacturing Excellence
- In-house tooling capabilities for faster turnaround
Start a New Injection Molding Project!



Your files are used to review your project. Need an NDA? Contact us before uploading.
Injection Molding Capabilities
Our injection molding service from rapid prototypes to high-volume production runs, we offer end-to-end capabilities under one roof — mold design, tooling, molding, finishing, assembly, and logistics.

| Capability | Specification |
|---|---|
| Materials available | PA, PA6, PA + GF, ABS, FR ABS, POM, PC, PS, PP, PVC, TPR, TPU, TPE, HDPE, PMMA and more |
| Mold type | Steel mold |
| Maximum mold size | 1500 × 1300 mm |
| Cavitation | Single-cavity or multi-cavity |
| Mold base | LKM or equivalent standard mold base |
| Core steel | NAK80, 718, 718H, P20, S136 and more |
| Mold lifetime | 50,000–500,000 shots |
| Machine tonnage | 80–1000 tons |
| Part tolerance | ±0.1 mm |
| Shot capacity | 0.1–10,000 g |
| Wall thickness | 0.5–5 mm |
| Draft angle | 0.5°–2° |
| Surface treatment | Chrome plating, silk printing, laser etching, texture and color painting |
| Tooling lead time | 3–7 weeks |
| Production lead time | 2–4 weeks |
Plastic Injection Molding Services for Custom Parts
Select the best molding service that suits your part design, material, and production objectives. Stick Industry offers custom injection molding, mold tooling, overmolding, and insert molding, along with engineering support ranging from DFM review and prototype samples to mass production.

Plastic Injection mold
Custom steel molds engineered to your part geometry, material, production volume, and tool life requirements—with mold flow analysis and prototyping sample validation included before production.
Get a quote
Injection Molding
We produce custom plastic parts on 80- to 1000-ton injection molding machines, with support for engineering plastics, DFM review, and scalable volumes from low-volume runs to mass production.
Get a quote
Over-molding
Turn two materials into one seamless part. We over-mold plastic and elastomer over substrates to create grips, seals, insulation, and functional features — with full engineering support from material selection to tooling.
Get a quote
Insert Molding
Integrate metal components directly into molded parts durable threads, solid anchors, and built-in conductivity. Our engineers assist with insert selection, part design optimization, custom tooling, and scalable production.
Get a quoteInjection Molding Manufacturing Facility
Xiamen Stick Industry Co., Ltd is a full-service custom plastic injection molding manufacturer with 20+ years of experience and a 20000 m² facility serving customers across North America, Europe, and Asia, etc.
Stick Industry produces custom plastic molded parts to your drawings using injection molding machines with clamping forces from 80 to 1000 tons. Experienced project managers provide clear communication and engineering guidance from start to finish.





How Our Injection Molding Process Works
At Stick Industry , we’ve simplified custom injection molding into a fast, transparent workflow. we streamline every step of custom injection molding from online quoting and DFM feedback to tooling, molding, and final delivery—engineered for speed, precision, and reliability .

Upload Your Design
Upload your 3D files (STEP, IGES, or STL) and 2D drawings through our online platform.
What happens behind the scenes:
Automated geometry analysis for pricing
Material and cavity-count recommendations based on your target volume
Secure file handling under strict NDA protection

2. DFM Feedback & Quote
Our engineers review your design for manufacturability within 48 hours. You will get a quote with DFM report
You receive:
A detailed DFM report
Material and process recommendations tailored to your application
A quotation with tooling and unit pricing
Approve the quote, and production begins immediately.

3. Prototyping Sample Review
We prototyping samples as per your drawings. You can validate form, fit, and function.
How the review works:
You do physical evaluation and assembly testing
You share feedback on dimensions, appearance, material performance, or functional concerns
Our engineers refine part structure for your approval
Mold making only begins with your written approval.

4. Tooling & Mold Making
Once your design is approved, our in-house toolroom gets to work:
3D mold design validated before mold making.
Tool steel selected by your volume: hardened steel production tooling
Precision machining via CNC, EDM and grinding.
When the mold is complete, we produce first trial parts and send you sample for approval along with a full dimensional inspection report. Any adjustments are made at this stage, so you know exactly what production will look like before committing to volume.

5. Production & Quality Control
Mass production begins on machines matched precisely to your part size and volume requirements after getting your sample approval
Automated production runs with robotic part handling and real-time process monitoring
In-process inspections and 100% final inspection or AQL sampling before packaging.
Full documentation accompany with shipment: dimensional reports, material certificates and compliance data (RoHS/REACH)

6. Finishing, Assembly & Delivery
Some project doesn’t end at the injection molding process, Base on your requirement, we provide:
Secondary operations: ultrasonic welding, insert installation, pad printing, laser engraving, spray painting, powder coating, plating etc.
Sub-assembly and full production assembly
Custom packaging and labeling
Worldwide door to door logistics with full tracking.
Injection Molding Plastic Material Selection
A Practical Reference for Injection Molding Projects — From Prototype to Production
At STICK INDUSTRY, we believe that exceptional products begin with the right materials. Our engineer will help you with the plastic material selection process ensures that every component meets the highest standards of performance, durability, and sustainability. We carefully evaluate a wide range of engineering and commodity plastics.
| Material | Shrink % | Key Properties | Typical Applications | Molding Notes |
|---|---|---|---|---|
| PP | 1.5–2.5 | Chemical resistance, low density, low cost, easy flow | Appliance housings, containers, auto interiors, toys | High shrinkage → warpage risk; brittle at low temps; UV stabilization needed outdoors |
| HDPE | 1.5–3.0 | Excellent chemical resistance, low-temperature toughness | Bottles, tanks, pipe fittings | High shrinkage; soft surface, prone to scratching |
| LDPE | 2.0–4.0 | Flexible, tough, semi-transparent | Film, tubing, gaskets | Low rigidity; narrow processing window |
| ABS | 0.4–0.7 | Excellent overall balance, easy to plate/paint, dimensionally stable | Electronics housings, appliance shells, toys | Poor weather resistance (yellowing outdoors); FR grades require dedicated resins |
| PS | 0.4–0.7 | Transparent, rigid, easy to process, low cost | Housewares, tableware, stationery, optics | Brittle; poor solvent resistance |
| PVC | 0.5–1.5 | Flame retardant, chemical & weather resistant (rigid) | Pipe fittings, cable ducts, profiles | Poor thermal stability — degrades & corrodes molds; strict temperature control |
| PET | 0.2–0.9 | Transparent, excellent barrier, strong | Bottle preforms, cosmetic bottles, food containers | MUST dry thoroughly — hydrolysis causes hazing |
| Material | Shrink % | Key Properties | Typical Applications | Molding Notes |
|---|---|---|---|---|
| PC | 0.5–0.7 | High impact, transparent, heat to 120°C, dimensionally stable | Safety lenses, electronics, medical, auto lighting | MUST dry 4–6h; stress crack risk; high viscosity → high temp & pressure |
| POM | 1.8–2.5 | Low friction, self-lubricating, rigid, fatigue resistant | Gears, bearings, sliding parts, faucets | High shrinkage; formaldehyde on degradation — ventilate; wear-resistant molds |
| PA6 | 0.8–1.5 | Tough, wear resistant, oil resistant, self-lubricating | Gears, connectors, cable ties, auto parts | Hygroscopic — dry before molding; dimensions shift with humidity |
| PA66 | 0.8–1.5 | Higher strength & heat resistance than PA6 | Under-hood auto, electrical | Same as PA6; higher melt temp (~260°C) |
| PA + GF | 0.3–0.8 | High strength & stiffness, low shrinkage | Structural parts, power tool housings | Abrasive — harden/coating molds; glass fiber read possible |
| PMMA | 0.4–0.8 | 92% light transmission, excellent weatherability | Lenses, light covers, displays, sanitary ware | High viscosity — high melt temp; stress crack risk |
| PBT | 1.5–2.2 | Excellent electricals, chemical resistance, dimensional stability | Connectors, relays, coil bobbins | Moderate drying; GF grades shrink anisotropically |
| TPU | 0.8–2.0 | High elasticity, abrasion & oil resistant | Phone cases, soles, seals, cable jackets | Hygroscopic — drying required; narrow window, burn risk |
| PPO/MPPO | 0.5–0.7 | Heat resistant, hydrolysis resistant, dimensionally stable | Electrical enclosures, pumps, medical | Moderate flow; thorough drying recommended |
| Material | Service Temp | Key Properties | Typical Applications | Molding Notes |
|---|---|---|---|---|
| PPS | 200–240°C | Heat resistant, UL94 V-0, exceptional chemical resistance | Connectors, auto sensors, pump housings | Mold temp 130–150°C required; flash control |
| PEEK | 250°C | Top-tier heat & wear resistance, biocompatible | Medical implants, aerospace, semiconductor | High resin cost; 350–390°C processing; high-temp mold controllers |
| PEI (Ultem) | 170–180°C | Heat resistant, flame retardant, extremely dimensionally stable | Sterilizable medical, aircraft interiors, electronics | Amber translucent; high-temp drying & barrel insulation |
Scroll the table horizontally on smaller screens to view all columns. Material values are reference ranges. Confirm the resin grade, supplier data, processing conditions, and project requirements before production.
View MoreApplications of Plastic Injection Molding
Stick Industry’s plastic injection molding services provide reliable engineering support and precision manufacturing from concept to finished product, supports a wide range of applications.
| Application | Example Parts | Engineering Review Focus |
|---|---|---|
| Electronics | Housings, covers, connector shells, brackets | Screw bosses, PCB fit, flame-retardant material |
| Automotive | Clips, covers, brackets, interior trim | Heat resistance, warpage, assembly fit |
| Medical Device Housings | Trays, covers, non-implant plastic parts | Material, clean handling, dimensional inspection |
| Industrial Equipment | Gears, bushings, covers, fixtures | Wear, tolerance, chemical resistance |
| Packaging | Caps, lids, trays, thin-wall containers | Cycle time, ejection, stacking, shrinkage |
| Consumer Products | Handles, appliance covers, cosmetic parts | Color, texture, gate marks, surface defects |
Why OEM Buyers Work With STICK INDUSTRY

End-to-End Manufacturing Capability
From DFM analysis and mold design to precision tooling, injection molding, secondary operations, and assembly, we manage the entire production process.

Tooling & Engineering Expertise
Work with a manufacturing and engineering partner. Our tooling team develops mold solutions around your part geometry, material, and production requirements.

Qualified Parts with Consistent Quality
ISO 9001:2015 certified processes support dimensional inspection, material verification, and in-process monitoring to keep custom molded parts aligned with your specifications.
Injection Molding FAQs
Answers to common questions about drawings, materials, tooling, samples, and production.
What files do you need for an injection molding quote?
Send a 3D CAD model, a 2D drawing where available, your material and surface finish requirements, and the target order quantity. STEP, STP, STL, IGS, IGES, PDF, ZIP, JPG, and PNG files can be uploaded in the form above.
How soon will I receive DFM feedback?
Our engineers review the design for manufacturability within 48 hours, according to the supplied project information. The review includes material and process recommendations and tooling and unit pricing.
What are the tooling and production lead times?
The supplied capability ranges are 3–7 weeks for tooling and 2–4 weeks for production. Your confirmed schedule depends on part complexity, material, mold requirements, and sample approval.
Which plastic materials can you work with?
Our materials include commodity, engineering, and high-performance plastics. Use the material selection tables above to compare properties and applications, then confirm the exact resin grade with our engineers.
Can I approve samples before mass production?
Yes. Prototype samples support form, fit, and function checks. After tooling, trial parts and a dimensional inspection report are provided for approval before volume production.
Can you support finishing and assembly?
Yes. Project options include surface texturing, painting, printing, laser engraving, insert installation, ultrasonic welding, sub-assembly, and final assembly. Confirm the required operations when requesting your quote.
Injection Molding Resources
Practical guidance for material decisions, cost planning, and choosing a manufacturing partner.

Plastic Material Selection Guide
Compare plastic properties, typical applications, molding parameters, and material selection recommendations.
Download the guide ↓
Plastic Injection Molding Cost in China: What International Buyers Should Know in 2026
Understand the factors behind tooling, materials, production quantities, and molded part costs.
Read the guide ↗
How to Choose a Plastic Injection Molding Manufacturer in China: A Buyer’s Guide for Global Brands
Review the engineering, tooling, and quality capabilities to look for in a manufacturing partner.
Read the guide ↗Start Your Injection Molding Project
Use the drawing upload form at the top of this page to send your files with your project details. For an initial discussion, leave a message below or email our team.
- 3D model and 2D drawing
- Material, finish, and target quantity
- Critical dimensions and application requirements
Prefer email? Send your drawings to
sales@stickindustry.com
For confidential projects, contact our team to arrange an NDA before sharing files.
