Surface Finishes / Surface Finishes & Plating
Surface Finishes & Plating
Electroplating, electroless nickel, zinc and chrome plating for corrosion protection and appearance on metal parts.
Get a Quote
Surface finishes and plating protect metal parts after CNC machining or die casting. Stick Industry supports electroplating, electroless nickel, zinc and chrome plating, passivation and conversion coating so corrosion resistance, wear life and appearance stay consistent from sample to mass production.
Plating options for metal parts
Buyers usually specify finish by function: outdoor corrosion, decorative brightness, or a dark industrial look. We match process to base metal—steel, zinc alloy or aluminum—and to the faces that stay visible after assembly.
- Electroplating — zinc, nickel, copper and chrome for hardware, fasteners and decorative faces
- Electroless nickel — even thickness in recesses and blind holes
- Passivation & conversion coating — stainless and aluminum prep before paint or assembly
- Black oxide / antique effects — non-bright surfaces for furniture and industrial looks

Process control and quoting
A clear RFQ shortens sampling. Share base material, coating callout or a plated sample, critical cosmetic faces, and any salt-spray or thickness requirement. We confirm racking points, mask areas and post-plate baking when hydrogen embrittlement is a risk. Incoming and outgoing checks cover visual grade, thickness sampling and adhesion where the drawing requires them.
Where plating is typically used
Plated finishes are common on door and lock hardware, bathroom fittings, furniture pulls, stamped brackets and small die-cast consumer parts. When secondary CNC touches plated faces, we plan machining allowance so final thickness still meets the print.
For OEM programs we can lock racking photos, thickness points and AQL into the control plan so later lots match the approved sample.

