Surface Finishes / Zinc Castings Finishes

Zinc Castings Finishes

Chrome, nickel, powder coat and antique finishes suited to zinc die-cast hardware, locks and sanitary parts.

Get a Quote
Zinc Castings Finishes

Zinc die casting finishes—chrome, nickel, powder coat and antique effects—are widely used on locks, handles and sanitary hardware. Zamak alloys take plating well; the right finish depends on whether the part needs bright chrome, body color paint or a brushed antique look for furniture and decorative markets.

Common finishes for zinc die castings

Most zinc hardware programs use nickel under chrome for brightness and wear. Powder coat is chosen when color match or outdoor film thickness matters more than a metallic look.

  • Bright / satin chrome — often over nickel; faucets, knobs and visible hardware
  • Nickel plating — alone or as undercoat before chrome
  • Powder coating — thicker color film for outdoor or painted housings
  • Antique / black nickel — furniture and decorative hardware
Chrome plated zinc die cast door handle

Process notes before plating

Castings are trimmed, tumbled or lightly machined, then cleaned before plating. Porosity and parting-line flash show up after chrome, so DFM and process control upstream matter as much as the plating bath. Salt-spray hours and coating thickness can be written into PPAP or the inspection plan when your buyer requires them.

AlloysZamak 3, Zamak 5 and related zinc alloys
Prep stepsTrim, tumble / polish, clean, plate or powder coat
Best forLocks, door handles, shower fittings, furniture pulls

Typical zinc finish applications

Zinc door handles, lock cylinders, shower fittings, furniture pulls and small consumer die-cast parts often ship plated or powder-coated. For multi-cavity tools we keep cavity-to-cavity polish and plating appearance aligned so lots stay consistent after approval.

Share alloy, finish standard, cosmetic faces and annual volume with the RFQ so we can size tooling, plating racks and inspection together.

Antique bronze finished zinc die cast hardware

Your One-Stop Manufacturing Partner

Founded in 2007, Stick Industry is an ISO 9001:2015 certified leader in die casting and plastic injection molding. With in-house tooling and four dedicated factories, we deliver complete solutions from initial design to final assembly.